Table 1 lists Altera® device families with links to respective PowerPlay early power estimator spreadsheets. If you already have design files or a project set up in the Quartus® II software, you can have the Quartus II software generate data to automatically populate the spreadsheets. During implementation, you can refine your power estimates using the Quartus II software's PowerPlay power analyzer tool.
| Table 1. PowerPlay Early Power Estimator Downloads | ||||
| Tools | Doc Version | Estimator | User Guide (PDF) | |
|---|---|---|---|---|
Stratix III, Stratix IV, Stratix V, HardCopy III and HardCopy IV PowerPlay Early Power Estimator 
|
13.0 | Download | Download | |
| Stratix II, Stratix II GX, and HardCopy II PowerPlay Early Power Estimator | 8.1 | Download | Download | |
| Stratix PowerPlay Early Power Estimator | 3.3 | Download | Download | |
| Stratix GX PowerPlay Early Power Estimator | 2.4 | Download | Download | |
|
Arria II and Arria V PowerPlay Early Power Estimator
|
13.0 | Download | Download | |
| Arria GX PowerPlay Early Power Estimator | 8.1 | Download | Download | |
|
Cyclone III, Cyclone IV and Cyclone V PowerPlay Early Power Estimator
|
13.0 | Download | Download | |
| Cyclone II PowerPlay Early Power Estimator | 8.0 SP1 | Download | Download | |
| Cyclone PowerPlay Early Power Estimator | 2.5 | Download | Download | |
| MAX V PowerPlay Early Power Estimator | 12.0 | Download | Download | |
| MAX II and MAXIIZ PowerPlay Early Power Estimator | 12.0 | Download | Download | |
| Max PowerPlay Early Power Estimator | 1.2 | Download | - | |
| HardCopy HC20K PowerPlay Early Power Estimator | 1.0 | Download | - | |
| HardCopy Stratix PowerPlay Early Power Estimator | 1.3 | Download | - | |
Arria, Stratix, Cyclone, MAX, and HardCopy are trademarks of Altera Corporation.
Table 2: PowerPlay EPE Spreadsheet version, Power Model Status, and Supported Feature Information for Altera FPGAs.
| Device Family | PowerPlay EPE Spreadsheet Version(1) | Power Model Status | Supported Features | ||
|---|---|---|---|---|---|
| Core(2) | HSIO | XCVR | |||
| Stratix® V |
12.1 SP1 and later |
Final for E, GS, and GX |
|
|
|
| Stratix IV |
9.1 and later |
Final |
|
|
|
| Stratix III |
9.1 and later |
Final |
|
|
- |
| Arria® V | 11.1 and later | Preliminary |  |
|
|
| Arria II GZ | 10.1 and later | Final | |
|
|
| Arria II GX | 9.1 and later | Final | |
|
|
| Cyclone® V | 11.0 SP1 and later | Preliminary | |
|
|
| Cyclone IV E | 9.1 and later | Final | |
- | - |
| Cyclone IV GX |
9.1 and later |
Final |
|
- |
|
| Cyclone III LS | 9.1 and later | Final | |
- | - |
| Cyclone III | 9.1 and later | Final | |
- | - |
| HardCopy® IV | 9.1 and later | Preliminary | |
|
|
| HardCopy III | 9.1 and later | Preliminary | |
|
- |
- The version of EPE spreadsheet that you use must correspond to the version of the Quartus II software. For example, if you use the Quartus II software v9.1 to generate the PowerPlay EPE file, you must use the EPE spreadsheet version 9.1.
- Supported cores in this table are logic, RAM, digital signal processing (DSP), I/O, phase-locked loop (PLL), clock, and intellectual property (IP).
Altera's PowerPlay power analysis features, including PowerPlay early power estimators and Quartus II PowerPlay power analyzer, give you the ability to estimate power consumption from early design concept through design implementation, as shown in Figure 1. As you provide more details about your design characteristics, estimation accuracy is improved with PowerPlay technology.
Figure 1. PowerPlay Power Analysis From Design Concept Through Design Implementation
View Webcast: Lower Power and Boost System Bandwidth on 28 nm FPGAs
